Shandong Top Building Materials Co.,Ltd is a professinal Manufacturer and supplier of Building Materials .
Specifications
Drywall joint Paper Tape
Drywall paper tape,fiberglass mesh tape . paper joint tapes
Drywall joint Paper Tape
Drywall paper tape is widely used tape in various applications for drywall partion boards . Eeoecially to be used for wall renovation , decoration and the like , It can be stuck to plasterboard , Cements as well as other building Materials completely and can prevent anainst the cracks of the wall and its corner .Meanwhile , it can use together with our fiberglass self -adhesive mesh tape , Make the building decoration and istallation easier .
Materials: Paper tape with metal reinforced, metal has aluminum strip or zinc
Technical Parameter
| Item Number |
OBM5030 |
| Metal Type |
Galvanized Steel |
| Metal Width |
11mm |
Paper Mass
(g/m2) |
145±5g/m2 |
| Thickness Of Strip |
0.23mm/0.26
±0.01mm |
| Width |
50mm±2mm |
| Length |
30m±2mm |
| Weight Per Roll |
1.45kg/1.6kg
±0.03kg |
| Item Number |
OBM5030 |
| Metal Type |
Aluminum Steel |
| Metal Width |
10mm |
Paper Mass
(g/m2) |
145±5g/m2 |
| Thickness Of Strip |
0.28±0.01mm |
| Width |
50mm |
| Length |
30m±2mm |
| Weight Per Roll |
0.75kg±0.02kg |
Feature:
High quality paper with two metal strip reinforce,apply good protect wall corner.
* Very high tensile strength.
* Steel with zincification or aluminium,rustiness resistant.
* Roll pack,easy to cut as requirement.
* Machine use available.
Application:
Flexible Metal Corner Tape is ideal for use in a variety of drywall applications: internal or external corners which are 90 degrees or not 90 degrees, for manual application only
How to use:
1. Cut flexible metal corner tape into one of the two strips with a knife to score and bend. The distance between your cuts will depend on how tight a radius you want to achieve. Apply generous coat of joint compound to a depth of 1/8", covering both sides of the corner the same time. With the metal facing the wall, fold tape at the center margin and press firmly into the compound.
2. Once the corner is embedded, remove excess compound with taping knife. After the first coat dries, sand lightly, apply finish coat and feather edges two inches beyond edges of the first coat. If needed apply a second coat 6"- 10" wide on each side of corner. When dry, sand lightly if needed. The wide, galvanized steel strips act as a guide to ensure straight, reinforced angles for both "inside" and "outside" corner needs.
Audited Supplier 
){kind=link}
){kind=link}